Five Hole Native American Style flute crafted from Old Growth Port Orford Cedar. This flute features a 7/8″ Bore and has a black walnut inlaid cutting edge. Tuned to the Key of G @ 440Hz this is a beautiful playing and sounding flute. Fetish is our Otter design and it is attached with our hand cut Wyoming Tan Bison leather. Overall length of the flute is 21 1/2″ with hole separation set at 1 1/8″ spacing for the bottom three holes and 1 1/16″ for the upper two. The mouthpiece has a wider aesthetic which by some is preferable.
This flute was completely handcrafted by Artist Timothy Jennings. What we like about this is the simplicity of this flute and one with a big beautiful voice. As with all of our flutes this flute was tuned at an altitude of 6,400 feet above sea level. Many time we will tune our flute to the flat side of the target note because of the higher altitude and severe difference in temperature and humidity. However this flute is spot on here in the Rockies. Taking this flute to lower altitudes and higher temperatures and humidity will affect the tuning a bit. But this flute should always be in tune with itself.
The inside of the flute was sealed like all of our flutes with many coats of lacquer and the outside of the flute is finished with more than 20+ very light coats of high gloss lacquer. This is simply a very nice flute. We are offering this flute at an entry level price as this would be a fabulous flute for the first time flute owner and yet one you will keep for many years.