Mustang Fetish Designs

Mustang fetish can be crafted with or without a chimney (wrap around) depending on the flute.

Our Wyoming Mustang Fetish is another best selling fetish designs.  Strength and stamina is a good way to describe the Wyoming Mustang.   Inspired by my days around our ranch and neighboring ranches where horses are part of everyday life.


This fetish was designed to be placed on a flute where the focusing channel is cut into the body of the flute.  However it can be adapted for those flutes that need the focusing channel cut into the bottom of the fetish itself.  This is best done before you shape your Mustang.

The Mustang is designed to have a chimney cut into it or you can leave the front as is.  Easy to tie to your flute.  Finish with oils or lacquers or even paint with acrylics… the choice is your.

Note:  All pre-cut Mustangs are a bit large allowing for you to craft down as you see fit.  Best worked with a dremel or similar tool

4 Fetish Options Available

  1.  Purchase a rough cut Do It Yourself (DIY) fetish and you complete the shaping and finishing of the fetish your liking.
  2. Purchase one of our already pre-shaped ready to finish fetishes.  These have been shaped by me and are ready for the final sanding prior to applying your desired finish.
  3. Purchase a fully completed fetish ready to attach to your flute.  Each one of these will have specific dimensions and feature of the fetish providing you more information so you can make an informed choice
  4. I offer custom work specific to your flute.  This requires at the very least accurate images and measurements of you flute.  I prefer you send me the flute you want the fetish made for so I can accurately match it to your flute.

Available Mustangs

Do it Yourself  Pre-Cut Mustang Fetish

1. DIY_MUSTANG_001 – Maple,  @ 1″ x 2 3/8″ x 3″.  Best suited for 3/4 or 7/8″ bore flute $16.50 Buy
2. DIY_MUSTANG_002 – Black Walnut,  @ 1″ x 2 3/8″ x 3″.  Best suited for 3/4 or 7/8″ medium sized bore flute $16.50 Buy

Ready to Finish Mustangs

1.  MUSTANG_PS_001 – Port Orford Cedar @ 9/16″ x 2 5/8″ x 3 3/8″.  Best for flute bores of 7/8″ or larger $28.00 SOLD

Fully Finished Mustangs

1. Coming Soon $42.00 Buy

Otter Request Form

%d bloggers like this: